So here's the Cellini spiral. I've used size 10 seed beads in olive green, then size 8 seed beads in silver-lined lime green, and gold silver-lined seed beads in size 6. The pearls are 4mm greens. I've made it gradually narrower towards the back.
And this is the other spiral rope that is basically an embellished right angle weave.
I'll be photographing the other dutch spiral soon, and I'm making a tight spiraled herringbone rope as well and then I think that will be all the spirals there are.
I seem to have trouble with my camera to USB connection so I couldn't list the photos from the camera yet. Just before I found out I could use the memory card in the lap top then move them over to the PC to edit and post. Thanks to Vedasbeads from Twitter.
So here are the photos of the freeform bracelet I made. It was so much fun making it.
60cm fishing line.
32 x 3mm (size 8/0) pink seed beads
36 x 3mm (size 8/0) blue seed beads
Techniques: Beadweaving, right angle weave
Difficulty: Medium
FRONT
Start at circle A, thread on 1 blue and 2 pink beads, crossover threads at bead 3. Continue circles B and C in this manner following bead circles and bead numbers, and keeping an eye on thread colours and bead colours.
At circle D be sure to add beads only on the blue thread, then cross over at bead 12. Follow the pattern up to circle G.
For circle H, again be aware of the beads only on the one thread, and crossover on bead 23. This starts the next row of the pattern.
At circle I watch the numbers and the threads, the red thread needs to go back in to a bead that you added before.
Continue in this manner for the rest of this diagram, pulling tight regularly.
You will notice the beading will want to curve a bit, allow this curve to come outwards towards the front. It should look a lot like the actual diagram.
TOP
You will now be working the top of the heart. The darkened beads means they’re already in there, and just need to be threaded through again.
Both threads will be coming out of bead 37, all that’s needed here is to add 3 blue beads to the blue thread, and cross over the last bead with the red thread.
Circle B needs the blue thread to go into the very first pink bead that you started the beading with in the front section (darkened), and just one pink bead is needed to crossover.
Continue in this way picking up beads from the front section whenever a shaded bead is shown.
Circle D needs 2 beads picked up from the front section.
Circle G is the turnover circle, where only the one thread has beads added.
Continue with the next row. Pulling tight regularly.
The piece should pull together at the top, so that you should now have a backless three dimensional heart shape.
BACK
You now need to turn the piece over to work the back.
All the outer beads are already here, and need to be picked up for every bead circle, except the last one.
Both threads will be coming out of bead 52. Bead circle A has pink beads only on the red thread.
Continue working along the edge, picking up beads from the previous sections and following bead circle letters, and bead numbers, and colours of beads and threads.
Circles D and K pick up beads previously added in this section, as well as previous sections (so watch the numbers).
Circle L doesn’t pick up any new beads at all, it just picks up the beads added earlier to form this last bead circle.
Optional
You can thread an extra bead in each middle section of the filled in colour. If you use the same size bead, it will stand out higher, as in the photo. You can also use a smaller size bead for a subtler effect.
You can also make this with bicones, or any other size beads.
Just for something different, I thought I would show that I can actually do quilling as well. For those that don't know what quilling is, it's a craft that uses paper to create all sorts of 3 dimensional objects. Often 2 or 3mm strips of coloured paper are curled and shaped into desired shapes and glued together to make the objects, other times the objects are made by folding and/or cutting paper to create the items.
quilled flower card
As usual I gave all my quilling away without taking photos. This one was given as a mothers day card for my Mum last year, she framed it. So I got her to get it out of the frame and get a photo. So here it is. I put a lot of work into it, so I really did need a pic of it. There were 4 layers of flowers in this card, and because Mum loves all sorts of flowers and lots of color, I tried to get everthing into it.
quilling flowers
I'll have to see if I can get other photos of other things I've made for people as well.
A HUGE 10% DISCOUNT OFF ALL ITEMS! NOT TO BE MISSED!
Craft Cove is having a sale. This months special is for 10% off EVERY item in my jewelry store!
Craft Cove has a huge collection of unique handcrafted jewelry and gifts for sale. Including beadweaving, chainmail jewellery and wirewrapping. There are necklaces and chokers, bracelets, earrings, 3d ornaments and animals, keyrings, even amulet bags, all in many different types of weaves.
Everything in Craft Cove is entirely handcrafted by Jenny Lawson here in Australia.
For all of May EVERY item is discounted by 10%. Only till the last day of May, so don't miss out.
Materials: 4mm crystals, or other beads
Size 10/0 seed beads
Stopper bead, any color, will be removed later.
Fine fishing line, approximately 80cm
Beading needle, or other fine needle
1. Thread the fishing line onto the needle
2. Tie on a stopper bead. A stopper bead is a bead the same size or smaller than the smallest bead you are using. String through it twice to hold it in place.
3. Add 6 seed beads, 1 crystal and 1 seed bead.
4. Go back through the crystal, and pull tight.
5. String on another 6 seed beads, a crystal, and this time 4 seed beads.
6. Go back through the first seed bead you strung on, through the same way you came from originally. Then back through the crystal.
7. Continue in this manner, adding 6 seed beads between each section, crystals next to each end, and ends alternating between a single seed bead, and a 4 seed bead circle.
8. This should form a zigzag pattern with the 4 bead circles on one end, and the single beads on the other, as in the diagram.
9. Stop when you have 6 of each types of ends. 12 points all together.
10. The thread should now be coming out of the crystal, in readiness for the 6 seed bead centre. Now instead of starting a new 6 bead section, just string back through the first section, all the way through the first 6 seed beads, the crystal, and the end seed bead.
11. You should now have a rough circle. String through the next single seed bead, at the next point, then the next. Continue through them all. Then go through them all again.
12. Tie off, and thread through a few beads. Remove stopper bead, tie, and thread through a few beads.
I'm giving the spirals a rest for a while. The cellini and Dutch spirals are both being made into necklaces so they take a little while to do. I find it helpful to take a break from work that takes too long, if I don't have a timetable for it, then I can come back to it fresh, or just do little bits as it takes my fancy.
I finished the other spiral rope which is really an embellished right angle weave. I wasn't too happy with it, so I gave it to my daughter, and tried different beads. More on this next time.
I've never done any freeform work before, so I thought I'd give this a go. It was a bit scary at first, the base was a bit crooked, but they say it's supposed to! Then I wasn't sure if everything should sit flat against the base. And I wasn't sure what to put where, or how to do it.
freeform beading
I started putting the bigger beads on, then gradually added some bridges, and I wasn't really sure this was going to work, it didn't look so good. I thought I'd just keep going, I added more beads, more bridges, then I was on a roll. All of a sudden it was taking shape. I added more of this and that. By now I loved doing it and I kept thinking of more interesting things to do with it. And believe it or not, I actually loved the look of it! Bummer! I promised my daughter she could have it, when I wasn't so sure how good it would look.
Anyway, I've nearly finished it. So I'll take a photo to post before she has it. But I'll definitely make some more. I'll post the photos of it next time.
So, I made the spiral rope. I made it with a few different colors and some different sized beads. I love the way it turned out. Here in Australia it's Autumn, and these are perfect Autumn colours.
3d beaded teddy bear
I've finished the Teddy Bear. It's so cute! I think I might try getting better photos though. These don't seem as good as they should be.
3d beaded bear
I'm halfway through a Dutch Spiral and the Cellini Spiral (Peyote Spiral). They'll be finished soon. The other new spiral that I spoke of last time, just known as Spiral Rope (same name as the other basic Spiral). This one is basically an embellished Right Angle Weave. I'll do this one shortly too.
So, I finished the "zulu bracelet" and the "flat spiral" bracelet But then I realized I'd given away the" single spiral rope" and another type of "Dutch spiral", without taking photos. So I'll make these two types again. I also discovered I still hadn't made the "cellini spiral", and "peyote spiral", so I'll make these soon as well. There is also another spiral I'd never seen before which was just called "spiral rope".
zulu bracelet
Here's the zulu
zulu beading
Here's the flat spiral
flat spiral bracelet
I decided to make a spiral button for the clasp as well. I love the way it turned out!
spiral clasp
I've started the "single spiral rope" and I've nearly finished the 3d teddy bear. Then I'll make some more spirals. You can see them all on my website http://craftcove.weebly.com
I've made so many different types of beaded spirals, and I've now discovered a new one! This new spiral is called the "Flat Spiral". I'll be making it soon.
The ones I've already made are: "Dutch Spiral", "Spiral Netting", "Aussie Spiral", "Russian Spiral" and "Double Spiral Rope". A couple I meant to do at some stage but never got around to doing were: "Triple Spiral Rope", "African Helix" and the "Cellini Spiral". I'll get around to them all at some stage, but I'm always finding other beading projects to do. Currently I'm making my second 3D beaded teddy bear from 3Dbeading.com, and I'm alternating that with my first "Zulu" Beaded Bracelet. It's not often I make more than one of each item, but I loved the teddy bear so much, I just had to keep one for myself.
I think most of you, by now would have heard about the devastating bush fires in South eastern Australia. There are nearly 200 people dead, thousands made homeless, hundreds of houses have been destroyed, thousands of acres of bushland has been burnt, and it's still going. Not all of the burnt out houses haven't even been checked for bodies yet, and many haven't yet been identified, many people can't get back to their houses to see if they're still standing. This has been the worst couple of days for Victorians ever.
Please give to the charities to help these devastated people and communities.